company news

Hex Steel Nut To The Maximum

2018-08-07
Source:

Hex Steel Nut To the maximum

Why hexagon nuts are most commonly used

People familiar with nuts know that many types of nuts, such as square nuts, round nuts, ring nuts, butterfly nuts, hex nuts, and so on. And then the market is the most common hexagonal nut, and why is the most commonly used hexagonal nuts? To see how netizens say.

Hex nuts, is the working people in the production and life in the continuous practice of crystallization.

1. The nut is made hexagonal, is to facilitate the use. On the machine, the parts of the nuts are sometimes not well enough, and the space of the wrenches is quite narrow. Hexagon nuts, once only need to pull the wrench 60 degrees, you can slowly tighten the nut, and four nuts need to pull 90 degrees each time. In other words, in order to tighten the nuts need to stay out of the place, the hexagon is smaller, but the octagonal nut because of the wrench and its contact surface is small, it is easy to slip, usually very little use, so hexagonal nuts use the most convenient. And then look at the wrench, the handle of the wrench and the wrench can be 30 degrees angle, so when the installation of the nut is very narrow place, the wrench can not be free when the hexagonal nut, as long as the wrench pull a nut, And then turn the wrench and then pull a nut, so back and forth repeatedly to pull a few times, you can tighten the nut.

2. The nut is made hexagonal, in order to maximize the use of materials. Because from the strength point of view, the big nut is smaller than the small, and the past nut is generally made by the round material milling out, the same a round bar, use it to do hex nuts than the four nuts High, and made with the same thickness of the round bar out of the hex nut, far more than the four corners of the nut.

In summary, hexagonal nuts use more convenient, but also more to increase the use of materials, therefore, the most common in the market.

The definition of hex nuts

Hex nuts and bolts, screws with the use of fastening machine from the role of connection. Which by the first type of six nuts with the most widely used, C-class nuts for rough surface, the accuracy of the requirements of the machine is not high, equipment or structure; A and B-class nuts for the surface is relatively smooth, high accuracy requirements Of the machine, equipment or structure. Type 2 hexagon nut thickness M thick, mostly used often often need to wear and tear of the occasion. The thickness M of the hexagonal thin nut is thin and is used for the case where the surface space of the connected part is restricted.